this post was submitted on 07 Jul 2025
123 points (90.2% liked)
Videos
16300 readers
39 users here now
For sharing interesting videos from around the Web!
Rules
- Videos only
- Follow the global Mastodon.World rules and the Lemmy.World TOS while posting and commenting.
- Don't be a jerk
- No advertising
- No political videos, post those to !politicalvideos@lemmy.world instead.
- Avoid clickbait titles. (Tip: Use dearrow)
- Link directly to the video source and not for example an embedded video in an article or tracked sharing link.
- Duplicate posts may be removed
Note: bans may apply to both !videos@lemmy.world and !politicalvideos@lemmy.world
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
120V vs 240V.
One has much more power available to achieve the same in a different time.
For example: I can easily boil 0.5L to 100°C of water in about 2-3min.
And the kettle is rated for 2kW.
actually that the why they are slower. most plug in devices in the usa are limited to 1.5 Kw. weather you used a 120v or 240v current it would just change how many amps it draws
Well yeah.
But if both are rated for 6 or 8 Amps and can only supply 240 or 120V, you are bound to that.
Thus the volts are important as well.
Something rated for so few wouldn't be a good heater. At 1.5 kw that typical cut off for small devices in USA. You draw 12 amp. Plug it into a larger 240 vlot circuit and it draws amps but you still only get 1.5 kw of heating. Same time to boil water