homeassistant

16655 readers

109 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

How do I run power to a USB-C powered sensor? (lemmy.nz)

submitted 1 week ago* (last edited 1 week ago) by Dave@lemmy.nz to c/homeassistant@lemmy.world

25 comments fedilink hide all child comments

I'm just bought an Airgradient air quality sensor (actually two, an indoor and an outdoor).

I want to mount the outdoor one but it needs a USB-C power supply. I can run a cable but power isn't exactly close. Do I somehow find a 10m USB-C cable and run it through the roof to the sensor that I mount on the side of the house? What's a normal way of getting USB-C power to an area far away from the closest power point?

you are viewing a single comment's thread
view the rest of the comments

[–] just_another_person@lemmy.world 2 points 1 week ago* (last edited 1 week ago) (1 children)

All of these other solutions aren't going to get you what you want 🤦

Search for "socket lamp USB power adapter" or something similar. You'll find what you need, and cheaply.

[–] Dave@lemmy.nz 1 points 1 week ago

I just want power to the device. Unfortunately there are no light sockets in the entire house, it's all wired in LED down lights 🤷