wirehead

joined 11 months ago
[–] wirehead@lemmy.world 14 points 1 week ago (1 children)

My dad designed jet engines and nobody made him design a jet engine on the whiteboard. So you are starting from the right place.

We are here where we are today because we spent too much time thinking that acting like the right kind of nerd meant you were a good programmer. There's nothing wrong with going to a job, working hard, and then doing something else. I know very productive engineers who don't have a favorite science fiction book who were great to work with.

Given things lately, I think it's healthy that a lot of people have had to take a step back and realize that their employer would totally harvest their organs for profit if they could get away with it. Providing people the right "tech subculture" cues has resulted in a lot of people working themselves to death and never seeing any income windfalls.

I actively hate a bunch of my old science fiction books from when I was a kid because they were written with what is, to my adult mind, a not-very-subtle fascist bent. There's, obviously, some great novels out there that expand your mind ... but at the same time, there's a lot of the science fiction canon where I'd probably hate working with people who took those books seriously.

And, likewise, there's a lot of people who simply don't have time because they are smart people actually trying to get into the lucrative field of computer science and a good scifi novel reading session is a luxury they just don't have.

"Tell me about your favorite science fiction book" is pretty much a textbook case for how to have good intentions but conduct an interview that's, when you step back and think about it some more, biased. It's checking for subculture-fit in ways that have nothing to do with how they are at work.

On the other hand, whiteboard tests are also useless.

If you want to make a better interview, I'd suggest you have an interview guide. Not a manager? Just write your own for your interviews and keep to it. This protects you from unconsciously giving the person who looks the part easy questions.

If you want to check for culture fit, talk about things at work that matter. Are you worried someone is going to talk down to a junior engineer? Make them talk about a time they had to mentor a junior engineer. Did they succeed? What did they do? Ask them about the best project manager or doc writer they worked with. Are you worried that they aren't serious enough about getting shit done at work? Talk about the worst incident they ever were part of, but not the technical parts, just how they made sure it got fixed. Are you worried that they aren't a good team player? Ask about their best collaborations. Or how they organized work on a large project. Or the time that they took one for the team. If you think through how the last crop of yuppies pissed you off for a while and break it down into questions that they'd not have a good answer to, you should be able to make a nice set of behavioral screening questions and a set of attributes that you want the person to display in their answers.

[–] wirehead@lemmy.world 1 points 3 weeks ago

The way I've been looking at it, if you want a chance at the starships, start with the spandex.

If we want a good and honest chance of being able to do interstellar travel of any sort, we're not going to get there by building an Enterprise and then hope that someone cooks up a warp drive for it before we finish ruining our only planet.

Maybe physics is all wrong and there really is a warp drive to be had. If there is one, it's not the sort of thing you can count on. We have to survive as a species until it happens.

Conversely, there's a real easy bet to be had. In 1.29 million years, Gliese 710 will be 0.17 light years away. The GAIA mission has identified some other candidate stars that are going to get fairly close sooner. So there's a solarpunk space travel bet of simply providing a stable society over the long term such that we can surf the stars.

Solarpunk is kinda the version that starts with the spandex. I'm at the point in my life where I kinda hate the whole Eugenics-wars/World-War-III thread to Trek because it kinda mutated away from the hopeful idea that we can survive a downturn into the idea that the collapse will create a new world which is ... risky.

[–] wirehead@lemmy.world 15 points 1 month ago (1 children)

IoT devices are, to be quite honest, a shitshow. Where your Sovol counts as such.

Either the device needs to call upstream to get updates or it's going to ship with a security bug that can be exploited. Or, in may cases, it'll have an unpatched security vulnerability and it'll call upstream to get updates.

It costs money to keep the necessary cloud infrastructure in place, both in terms of hosting costs as well as devops time. Either they will eventually need to brick the device, leave it unpatched forever, charge you some maintenance fee, go bankrupt, or fund the whole thing by selling your data.

It's not hard to write a bot that would scan for signs of a Sovol printer, try the default SSH password, and do nefarious things. And people are generally really bad about the default SSH password regardless.

There's not really a good answer here for IoT devices. There's not even a really great answer for home brew IoT devices with the thing where Home Assistant's reverse-tunnel service had a nasty vulnerability that let you remote HA instances.

Aaand.. IPv6 is great. But unfortunately the way things are now means that giving everything on your network a publicly routable IPv6 address is a very bad idea.

Klipper provides a lot of protections but all of that hinges on the microcontroller, so presumably an attacker can upload a substitute firmware using the update mechanism that would go full send on the heaters, which has the potential to actually melt some things.

The problem is that if you want Klipper, you need a full Linux. This is not actually a problem for the Klipper devs, mind you, because they wrote a cool tool for people comfortable modding their printers and only BTT and Obico sponsor Klipper. This was a lot less of a problem when we were talking about Marlin printers. Except that if people weren't using Klipper, it's just too damn easy to write a two-piece controller software in the same fashion of Klipper and get the expediency of writing code in Linux instead of in an os-less microcontroller.

tl;dr: there is no safe way to buy a printer with klipper on it, it just looks like it works right now.

[–] wirehead@lemmy.world 4 points 1 month ago

FYI: Text sometimes work when calls don’t. Text use much less bandwidth.

Sure.... but.... not all municipalities let you text 911. And with the way modern phones are being implemented with VoIP+LTE and iMessage/RCS and some of the very exciting failure modes of modern networking... I'm having a very real concern that even if my municipality lets me text 911 (I don't remember offhand but I think mine does) that if I actually needed to dial 911 under relatively prosaic emergencies like a silly little power outage, I might be out of luck.

[–] wirehead@lemmy.world 5 points 1 month ago (2 children)

I'm not convinced on the cell phone thing. Every time there's even a minor thing around where I am, like a dinky little power outage, everybody grabs their cellphone and my service goes to crap, so much so that when I've tried to work through a power outage with my phone, I've worked out of my wife's car after having driven somewhere that does have power.

Also, a standard ham radio uses a lot less power than the entire chain of phone plus network equipment. So, sure, there's cell tower trucks with generators but a ham rig needs a dinky little solar panel.

[–] wirehead@lemmy.world 18 points 1 month ago (2 children)

I guess it depends on your aspirations and where you live?

A radio that can hit the bands longer than the 10 meter band is pricey. Which is why Ham has traditionally been the sort of hobby that a distinguished older white gentleman does, not a thing for regular people.

On the other hand, a cheap VHF/UHF handheld radio can be really quite cheap (Baofeng radios being an example). You will only be able to talk to the local area but most areas have a repeater in convenient geographic locations (mountaintops, ideally) that will listen on one frequency and then transmit at higher power on another frequency so that you can reach a wider area. So in my area for the EmComm use-case, there's a whole organized VHF/UHF system of volunteers.

Oh yeah, and you can also screw around with putting custom firmware on WiFi devices or Meshtastic in Ham mode.

I dono... I'd like to think that there's useful things especially these days to be done with Ham radio and that it's not just a thing that is just for distinguished older white gentlemen, but it's kinda hamstrung (LOL, pun) by the present-day audience that's preventing people from seeing what it could be.

[–] wirehead@lemmy.world 16 points 1 month ago (1 children)

Funny you ask because I literally just got my ham license because of this.

Radio works without infrastructure. Okay there's some ham stuff that is internet-connected et al but overall you are just spewing radio waves into the ether with a variety of simple encodings and someone else can pick them up. So powering a few radios off of a dinky solar panel and battery combo is no biggie, whereas powering cell towers, routing infrastructure, et al is a bunch of generators that need to be fueled and whatnot.

Like... you can hit the 20-meter-and-longer wavelengths with a radio and a random bit of wire and some ingenuity and get your signal all over the place. And the maximum power you are ever allowed is 1500 watts and most folks can make do with far less power than that.

Also, amateur radio has fun stuff to do other than mere EmComm needs. Part of why Twitter used to be handy in a pinch for lesser-disasters in days past was that it could be used for EmComm needs but also had other fun stuff to be done with it. Things that are "just" for EmComm infrastructure tend to get forgotten about and abandoned and rot away to nothingness.

A lot of areas in the US have ARES/RACES orgs to provide an already organized group of people... but some of the fun games that hams play like POTA/SOTA, Field Days, et al also serve to make it fun to have a portable setup.

[–] wirehead@lemmy.world 4 points 1 month ago

The last time the fires hit my area I was watching the fire progress via Purple Air sensors. If this one sensor was still sending, then my friend's place up in the mountains was probably OK. Seems ... kinda obvious almost?

[–] wirehead@lemmy.world 5 points 2 months ago (1 children)

So... I'm not sure if this is an entirely rational thought.

I'd always wanted to do ham radio but hadn't bothered. Before my time, ham radio let you do amazing things that weren't otherwise very easy. Like have a group chat with a bunch of people all over the world. Except when I was looking for things to do, you could get on the Internet and chat with a bunch of people all over the world ... without the antennas and hardware and all.

Lately some stuff happened and my spouse's friend who lives near Asheville NC and lived through the flooding there where ham radio was the only working form of communications, so my spouse got pressured into buying a radio, which means that I got myself a license because ... well, radio works without much infrastructure?

Mostly I figure I needed to fill the void that was getting on Twitter if something happened locally.

[–] wirehead@lemmy.world 3 points 2 months ago

My household celebrates two different winter-related holidays, Christmas included.

I have some connectors there on my ESPHome devices to string up intelligent LED strands. I even got some RGBW LED strands so that I can have more pleasant-looking lights.

I've got a fake tree and some other decorations, plus a blob of older LED and incandescent strands.

...and I just haven't felt any real holiday spirit the past few years so none of it's been put up.

[–] wirehead@lemmy.world 13 points 2 months ago (1 children)

The hard-to-solve problem with the news is that reporting on suicides causes suicide (as in: more people commit suicide, not just people who were on the ledge decided to go) yet people also want to know things.

I'm unclear if the usual disclaimers added to the article actually help or just are the only sounds-like-it-might-help thing that comes to mind so at least the publisher can feel better about the added deaths that, statistically speaking, they might be causing. I just remember it being covered in one of my college gened classes and the way it was presented was that everybody threw up their hands in frustration and gave up.

An acquaintance who screwed up her leg really bad and went through a whole process of getting bolted back together et al decided that she wasn't going to tell people what happened. Because everybody always asks "how'd you do it?" as if it was some curse that she had personally triggered that they could avoid. And I thought about how the first question in my mind was "how'd you do it?" and I guess it made me think about the inanity of making sure to check for flying herring while traveling backwards hanging out the window of a train going between Albuquerque and Phoenix after having signed up for a triple indemnity life insurance plan.... or something like that.

The only exception, of course, is you are doing something that the news orgs consider "wrong" like doing drugs or being certain categories of mentally ill or riding a bicycle for transportation.

[–] wirehead@lemmy.world 4 points 2 months ago

I'd ended up having a conversation with an archivist about the somewhat related question of "What was the Soviet Union's history of itself, absent the editorializing that the rest of the world has been doing?"

For example, Tamim Ansary wrote Destiny Disrupted: A History of the World through Islamic Eyes that explained a lot of things about the middle east through that sort of lens, so I was hoping that someone would write a history of the USSR in a similar fashion, which I didn't find.

One of the problems we have when approaching the more successful world governments is understanding ... well, I guess good intentions? There's kinda two sides to the story of Dear Leader. On one side, the self-aggrandizement as the father of the country, on the other side the act of actually trying to be the father of the country. Obviously a strongman today is mostly running the show almost entirely for selfish reasons but what you kinda see in the USSR and modern day China is at the same time an attempt to make the state better off. Which, of course, falls prey to effective use of power. "Do this or you will be executed" doesn't work very well.. not with the US approach to the death penalty, not to the totalitarianism of the attempted Communist state.

But, even today, there's tons of "Good idea, bad implementation" things that the Chinese government does where the rest of the world governments just let things get worse.

The vibes I was getting in the days of Lenin from my reading was interesting. Lenin was the leader of the USSR but not in the way that Stalin was. The Bolsheviks of the time insisted that things be discussed and debated and worked through and not even Lenin was above that. And there was a very forward-looking idealistic sort of viewpoint. They could reject everything and do things right for once and many of them were new to power so they were freed of that worldview. And a lot of those things didn't pan out as well as they wanted it to and people started to need to be "convinced" to do the new thing. First the "useless" hereditary upper-class, but then everybody else. And then eventually Lenin died and Stalin didn't have that much patience for the Bolshevik old-guard and took over.

tl;dr: In a sense, it's as if a bunch of Star Trek fans had toppled a government and were trying to build the best government ever for the future, using whatever means necessary.

 

How I did this: A circus artist friend was performing her butoh-themed act where lays under a plastic sheet and moves around artistically so I brought my Olympus E-M1 Mk III and 12-40mm f/2.8 pro lens. And then I held a cube prism in front of the lens which does all kinds of whacky things like giving wild flares and reflecting other bits of the room into the frame somewhat randomly. ISO 3200, P mode, processed lightly in DxO PhotoLab - the DeepPRIME XD mode is a huge win for shooting high ISO on the small-ish Micro 4/3 sensor.

view more: next ›