Obviously not something anyone should do, considering the many Microplastic Filled Reasons... but curiosity wise, would it Theoretically be possible?
Back in December I got my P1S and since I mostly printed Vases and plant pots back then, I decided to mostly use PETG.
That PETG as I now know was just Wet, which caused it to ooze out of the nozzle after the print, a Fact I hated. Since at the time I must've be pretty stupid, I decided to clean it by Heating the Nozzle to the max of 300°C and let it ooze fully out. It did work and the prints after it where fine... so I did it another 10-20 times until I got a Brass Brush and started just using that...
In retrospective, Filament really shouldn't be heated over its limit... because that probably Backed in the PETG really hard. Mustve been to the point where the nozzle clogged, getting me to cold pull it a lot.
Big question is, is there still Backed in PETG in that nozzle, even after 20 or so Cold Pulls? It definetly seems to underextrude a noticable bit. Should I use the replacement nozzle or look into other reasons for said Underextrusion? Thanks!
Edit: Did as suggested and tried swapping the nozzle, thermistor was stuck and getting it out broke it, replacement thermistor is gonna take till thursday to arrive, god I hate this machine
Nope! I am German and we Capitalise loads of Words. Combine that with me feeling better seeing some words just be big (Think of how Youtuber Capitalize every Word in thier Video Titles)! So Overall, really I just go off Vibes~
For those out of the Loop, what happened?
I've had moments where they admitted to Generating the Images in thier Bio, yet even with that knowledge I could not tell. I reccon this is much more of an issue in the Anime Artist scene where there are more varied Art styles to steal and replicate...
As someone who is largely around the art community admiring and sharing thier work, the fact that I could confuse AI Generated Images and thusly falsely share or save them has been such a huge anxiety of mine every since 2022
Once I stop seeing this garbage daily, sure~
Not gonna lie, this actually looks like a banger
Oooooo what are some upgrades you'd recommend?
Here is all the Stuff I printed with my new P1S thus far!
Since im here, I'll need a bit of advice/guidance tho... For one, sometimes the nozzle doesn't clean itself properly and flings its poop on the bed. From what I read I can put an A1 Nozzle Wiper somewhere to insure it cleans better?
And for the bigger, what I asume to be Issue, even when it wipes itself successfully, there always comes out a large string of Filament afterwards, which the P1S does not try to clean. Then going on to print away with this string still on. It seems very unintentional. 
While this is manageable in single colour prints, it makes using the AMS basically impossible, as this happens after every Colour change. This is what the bed looked like after my only proper Multicolour Print... 
Anyone faced the same issue who could maybe help me?
Huh Interesting. Might see if I got some stuff to post there
Honestly, especially recently I feel like this place has been just a big Opinion Bubble/Echo Chamber and as someone who values trying to avoid these types of Bubbles and wanting to see what other opinions may look like this has consistently been one of my Biggest Issues with Lemmy. Not to mention that making it really hard to honestly recommend Lemmy to outsiders
Hello folks!
I just found out that my PC from 2018 with its GTX 1080 is infact capable of an SLI upgrade. Now Needless to say thats a terrible Idea! Being well aware of that, I still wanna do it if not for no other reason then for Fun!
So I wanted to ask what are some pitfalls I should look out for here? Some things I should be aware of when taking on this frankly Silly Idea? Thanks!
As one of my first ever self designed Prints and 3D Models, I wanna do a big organiser for my Kitchen! This is my current progress on that:
One of my friends gave me a word of caution to use the right filament when it comes to storing things like Sugar, Pepper, Salts and Tea Bags with Printed Plastics. So I wanted to ask if any of you have Good Safe Filament Recommendation for this type of thing? I heard PETG is supposedly safe, is that true? Thanks!
cross-posted from: https://lemmy.blahaj.zone/post/18664484
cross-posted from: https://lemmy.blahaj.zone/post/17737443
Femboys are a Human to the freezer.
So glad The Freezer has accepted them